Emerson Process Management ROSEMOUNT 5300 Bedienungsanleitung PDF herunterladen (Seite 191)

Reference Manual

00809-0100-4530, Rev BA

July 2009

A-7

Rosemount 5300 Series

• EN:

316L SST according to EN 1092-1 Table 18, material group 13E0.

Standard: Max. 302 °F/580 psig

(150 °C/40 Bar).

HP/HTHP/C: Up to PN 320.

Alloy C-276 according to EN 1092-1 table 18 material group 12E0.

HP/HTHP: Up to PN320.

• Fisher & Masoneilan:

According to ANSI B16.5 Table 2-2.3.

Standard: Max. 302 °F/580 psig

(150 °C/40 Bar).

HP/HTHP/C: 32 °F/1199 psig (20 °C/82.7 Bar).

Up to Class 600, Table 2.3.

• JIS:

According to JIS B2220 Table 2.3

Standard: 10K/20K/150C.

HP/C: 10K/20K/200C.

HTHP: 10K/20K/400C

For Alloy C-276 HTHP/HP probes with flange plate design is available up to

Class 600/PN 63.

Ambient Temperature When the Rosemount 5300 is installed in high or low temperature

applications, it is important that the maximum/minimum ambient temperature

is considered. Nozzle insulation for the HTHP version should not exceed 4 in.

(10 cm).

The diagram below shows the ambient temperature vs. process temperature:

Figure A-5. Ambient

temperature vs. process

temperature.

NOTE!

The maximum ambient temperature also depends on hazardous locations

certfications.

-320 (-196)

-40 (-40)

-17 (-27)

Process

Temperature °F (°C)

Ambient Temperature °F (°C)

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 323 324

Keine Kommentare

Emerson Process Management ROSEMOUNT 5300 Bedienungsanleitung Seite 191